PTFE pleated membrane alkaline cartridge chemical industry filter
Flushed with EUI pure water
100% integrity test
The DLM-PTFE pleated filter cartridge is constructed of imported
natural hydrophobic polytetrafluoroethylene membrane media and
non-woven support materials. The adaptors are thermally welded
without the use of glues of adhesives to prevent any possibility of
2.vent filter of hold tank.
4.Semiconductor: ultrapure gas filtration
|Support Layer/Cage/Core/ End caps :||Polypropylene (PP)|
|Seal Material :||Silicone,EPDM,NBR,Vilton,Teflon,E-FKM|
|Removal Rating:||for liquid : 0.2um, 0.45um, for gas :0.02um, 0.05um|
|Maximum Operating Temperature||90°C|
|Maximum Differential Pressure :|
|Maximum Differential Pressure(Reverse Direction):|
|Maximum temperature sterilization :||121°C every 30 30minutes,100 times|
|other||When filter the air, pressure is 2 bar ,start pressure 100Mbar
,10filter can flow 300NM³/h|
1.Excellent performance of high temperature-resistance, repeat
steamability in situ.
2.Hydrophobic membrane with high flow.
3.Low pressure drop, high flow rate, long service life